The work consists in the study of twist metamaterials which, if subjected to a normal compressive stress, go into torsion. Three different topologies were designed in cad with this property and subsequently produced for DLP additive manufacturing, tested by compression test, where several test slots were performed for each geometry by varying the initial conditions, with rotation allowed, with rotation prevented, without twist effect, the test results were used to search for the graphs through software implementation using matlab concerning the curve: stress- strain, specific energy absorption, efficiency, rotation trend, characteristic of each geometry and necessary for the structural characterization of the material, making it possible to compare the different geometries and test conditions.
Il lavoro consiste nello studio di metamateriali torcenti i quali se sottoposti ad uno sforzo normale di compressione vanno in torsione, si sono progettate al cad tre topologie differenti con questa proprietà in seguito sono state prodotte tramite additive manufacturing DLP, testate tramite prova di compressione, dove sono stati eseguiti diversi slot di prova per ogni geometria variando le condizioni iniziali, con rotazione permessa, con rotazione impedita, senza effetto di torsione, i risultati dei test sono stati utilizzati per ricercare i grafici tramite implementazione software mediante matlab riguardanti la curva: stress-strain, l'assorbimento di energia specifica, l'efficienza, l'andamento della rotazione, caratteristici di ogni geometria e necessari per la caratterizzazione strutturale del materiale rendendo possibile una comparazione tra le differenti geometrie e condizioni di prova.
Progettazione, realizzazione e analisi del comportamento elastico di metamateriali torcenti
CECCONI, NICOLAS
2021/2022
Abstract
The work consists in the study of twist metamaterials which, if subjected to a normal compressive stress, go into torsion. Three different topologies were designed in cad with this property and subsequently produced for DLP additive manufacturing, tested by compression test, where several test slots were performed for each geometry by varying the initial conditions, with rotation allowed, with rotation prevented, without twist effect, the test results were used to search for the graphs through software implementation using matlab concerning the curve: stress- strain, specific energy absorption, efficiency, rotation trend, characteristic of each geometry and necessary for the structural characterization of the material, making it possible to compare the different geometries and test conditions.File | Dimensione | Formato | |
---|---|---|---|
Tesi Nicolas Cecconi consegna (2) (1).pdf
accesso aperto
Descrizione: titolo: Progettazione, realizzazione e analisi del comportamento elastico di metamateriali torcenti
titolo inglese:Design, implementation, and analysis of the elastic behavior of twist metamaterials
Dimensione
1.49 MB
Formato
Adobe PDF
|
1.49 MB | Adobe PDF | Visualizza/Apri |
I documenti in UNITESI sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/20.500.12075/13416