In an electric powertrain with an independent motor per wheel, torque distribution is no longer determined by a mechanical differential but computed in real time by a control system, enabling vehicle dynamics control strategies such as torque vectoring that are difficult to achieve with a conventional mechanical differential. This thesis presents the Model-Based Design and embedded implementation of the powertrain control system of the Peacock Elettrica, the electric prototype of the Polimarche Racing Team for the Formula Student competition. The vehicle has two independent rear motors and no mechanical differential. A microcontroller hosts the safety logic, the vehicle state machine and the code generated from a Simulink model. The control model combines a yaw-correction logic, based on differential torque distribution between the rear wheels, with a traction control logic for longitudinal slip regulation. Both are supported by a per-wheel estimate of the residual grip margin and by an allocator that combines their outputs within the physical limits of the powertrain. The system is verified in simulation on a simplified vehicle model over virtual tracks reproducing the Acceleration, Skidpad and Endurance dynamic events. The simulations both isolate the effect of the individual algorithms and cover a complete integrated lap, with results consistent with the expected behaviour. The thesis concludes with the design of the driver interface for the runtime configuration of the control parameters.
In un powertrain elettrico con un motore indipendente per ciascuna ruota, la ripartizione della coppia non è più determinata da un differenziale meccanico ma calcolata in tempo reale da un sistema di controllo, rendendo possibili strategie di controllo della dinamica del veicolo, come il Torque Vectoring, difficilmente realizzabili con un differenziale meccanico convenzionale. La tesi presenta la progettazione Model-Based e l'implementazione embedded del sistema di controllo del powertrain della Peacock Elettrica, il prototipo elettrico del Polimarche Racing Team per la competizione Formula Student. Il veicolo dispone di due motori posteriori indipendenti, privi di differenziale meccanico. Un microcontrollore ospita la logica di sicurezza, la macchina a stati del veicolo e il codice generato da un modello Simulink. Il modello di controllo integra un correttore d'imbardata, basato sulla ripartizione differenziale della coppia tra le ruote posteriori, e un controllore di trazione per la regolazione dello scorrimento longitudinale. Entrambi sono supportati da una stima del margine di aderenza residuo per singola ruota e da un allocatore che ne combina le uscite nel rispetto dei limiti fisici del powertrain. Il sistema è verificato in simulazione su un modello di veicolo semplificato, su tracciati virtuali che riproducono le prove dinamiche Acceleration, Skidpad ed Endurance. Le simulazioni isolano l'effetto dei singoli algoritmi e coprono un giro completo con il sistema integrato, con risultati coerenti con il comportamento atteso. Il lavoro si conclude con la progettazione dell'interfaccia pilota per la configurazione a runtime dei parametri di controllo.
Progettazione Model-Based e Implementazione Embedded del Sistema di Controllo del Powertrain per un Prototipo Formula Student Elettrico
ZINGARETTI, ALESSANDRO
2025/2026
Abstract
In an electric powertrain with an independent motor per wheel, torque distribution is no longer determined by a mechanical differential but computed in real time by a control system, enabling vehicle dynamics control strategies such as torque vectoring that are difficult to achieve with a conventional mechanical differential. This thesis presents the Model-Based Design and embedded implementation of the powertrain control system of the Peacock Elettrica, the electric prototype of the Polimarche Racing Team for the Formula Student competition. The vehicle has two independent rear motors and no mechanical differential. A microcontroller hosts the safety logic, the vehicle state machine and the code generated from a Simulink model. The control model combines a yaw-correction logic, based on differential torque distribution between the rear wheels, with a traction control logic for longitudinal slip regulation. Both are supported by a per-wheel estimate of the residual grip margin and by an allocator that combines their outputs within the physical limits of the powertrain. The system is verified in simulation on a simplified vehicle model over virtual tracks reproducing the Acceleration, Skidpad and Endurance dynamic events. The simulations both isolate the effect of the individual algorithms and cover a complete integrated lap, with results consistent with the expected behaviour. The thesis concludes with the design of the driver interface for the runtime configuration of the control parameters.| File | Dimensione | Formato | |
|---|---|---|---|
|
AlessandroZingaretti.pdf
embargo fino al 24/04/2028
Dimensione
61.19 MB
Formato
Adobe PDF
|
61.19 MB | Adobe PDF |
I documenti in UNITESI sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/20.500.12075/29638